专业从事于：宁波打井,宁波打井队,宁海打井,奉化打井,余姚打井,象山打井钻井

本钻井队专业从事钻深井、机械钻深井、机械钻井、地源热泵钻井、安装水空调、水空调安装、安装水温空调、安装冷风机、冷风机安装、装水空调、工程降水、深井降水、管井降水、基坑降水，技术力量雄厚，设备先进。拥有总工程师四名，工程师八名，从事八年以上技术工人五十人。机械型号：SPJ—500型水井钻三台，SPJ-300型水井钻四台，SPJ-200型水井钻六台，取石钻井机两台(可取600米深)，SPJ-150型水井钻八台，SPJ-100型水井钻九台，满足企事业单位用水量4-400吨/小时，轻型井点降水设备68组，深井降水泵980台。 此井可给工业生产直接供水，对洗浴休闲中心有广泛的用途。也可以用于养殖业、农田灌溉还可以作为大型商场、医院水空调的配置还可以作各企业单位消防紧急备用水源等。此井是各企事业单位必备之备，冬暖夏凉、取之不尽、用之不完。 一口好井每小时出水量可达到4-400吨或更多（根据需求而定），水源绝对取于地面以下数十米乃至数百米以下的水层，水质清澈味纯。一口深井既解决缺水之急，又可节省大量的自来水及排污费，给企业带来双重的经济效益，真正实现一次投资长期受益的目的。 深井施工程序 A.中型深井由PPR塑料管材直径为160mm,钻孔为300mm，周围孔距间填黄沙，根据地质和地形确定深度和水量。 B.大型的深井有高压、高温水泥制品管，井管直径360mm,每根长度为4米，两头连接钢箍，两管直接电焊连接，钻孔直径为600mm,深度可达100-600米，周围孔距间填充石英沙，水量多少根据贵公司用量决定，确保用水。 降水施工程序 降水井有两种施工方案 A.有深井降水(大口径降水），降水效果深度可达60米，周径及直径40米，根据地形、地质报告进行施工来确定方案。 B.轻型井点降水(插钢管真空降水），降水效果深度可达7米，周径及直径根据每组每套来决定，最终根据地质报告和平面图进行施工来确定方案。 钻井规格 钻井规格：直径100mm-1600mm,深度10-600米，出水量：4-100吨/小时。

Specializing in: Ningbo well drilling, Ningbo well drilling team, Ninghai well drilling, Fenghua well drilling, Yuyao well drilling, Xiangshan well drilling .

this drilling team specializes in deep well drilling, mechanical deep well drilling, mechanical drilling, ground source heat pump drilling, installation of water air conditioner, installation of water air conditioner, installation of water temperature air conditioner, installation of air cooler, installation of air cooler, installation of water air conditioner, engineering precipitation, deep well precipitation Tube well dewatering and foundation pit dewatering have strong technical force and advanced equipment. It has four chief engineers, eight engineers and 50 skilled workers who have been engaged in more than eight years. Mechanical model: three spj-500 water wells, four spj-300 water wells, six spj-200 water wells, two stone drilling machines (600 meters deep), eight spj-150 water wells and nine spj-100 water wells, meeting the water consumption of enterprises and institutions of 4-400 tons / hour, 68 sets of light well point dewatering equipment and 980 deep well dewatering pumps. This well can directly supply water to industrial production and has a wide range of uses for bathing and leisure centers. It can also be used in aquaculture and farmland irrigation. It can also be used as the configuration of water and air conditioning in large shopping malls and hospitals. It can also be used as the emergency standby water source for fire fighting of enterprises. This well is a necessary preparation for enterprises and institutions. It is warm in winter and cool in summer, inexhaustible and inexhaustible. The water output of a good well can reach 4-400 tons or more per hour (depending on the demand). The water source is definitely taken from the water layer tens of meters or even hundreds of meters below the ground. The water quality is clear and pure. A deep well can not only solve the urgent water shortage, but also save a lot of tap water and sewage charges, bring double economic benefits to the enterprise, and truly realize the purpose of long-term benefit of one-time investment. Deep well construction procedure A. medium sized deep wells are made of PPR plastic pipes with a diameter of 160mm and a drilling hole of 300mm. The surrounding hole spacing is filled with yellow sand. The depth and water volume are determined according to the geology and topography. B. Large deep wells have high-pressure and high-temperature cement product pipes with a diameter of 360mm and a length of 4m. The two ends are connected with steel hoops and the two pipes are directly connected by electric welding. The drilling diameter is 600mm and the depth can reach 100-600m. The surrounding hole spacing is filled with quartz sand. The amount of water depends on the amount of water used by your company to ensure water use. Dewatering construction procedure there are two construction schemes for dewatering wells. A. There are deep well dewatering (large-diameter dewatering). The depth of dewatering effect can reach 60m, and the perimeter diameter and diameter are 40m. The construction scheme shall be determined according to the terrain and geological report. B. For light well point dewatering (vacuum dewatering with steel pipe inserted), the depth of dewatering effect can reach 7m. The circumference and diameter are determined according to each set of each group. Finally, the construction scheme is determined according to the geological report and plan. Drilling specification drilling specification: diameter 100mm-1600mm, depth 10-600m, water yield: 4-100t / h.